Follow these easy steps to get your Horizon Fitness Elite Series 3.1E Vacuum Cleaner up and running in no time.
Unpack the elliptical trainer where it will be used. Ensure the area is clear and place a protective covering on the floor if necessary.
Position the front foot tube and attach it using the appropriate bolts. Ensure not to fully tighten the bolts until all assembly steps are completed.
Secure the left and right guide rails to the base of the elliptical trainer using the designated screws.
Install the console mast and boot, making sure to carefully pass the console cable through the mast without pinching the wires.
Connect the pedal arms and sleeves, ensuring that the black 'Teflon' surface is facing the pedal arm.
Install the lower handlebars to the console mast, followed by the upper handlebars, ensuring all are securely fastened.
Attach the console to the console mast and connect all wires, taking care not to pinch them during the process.
Ensure the elliptical trainer is placed on a level surface to optimize its performance.
Plug the power supply into the power jack located near the front foot tube and switch on the elliptical trainer.